Repointing Bilston West Midlands (WV14): No matter how old your home in Bilston is, there will come a point when a bit of maintenance is needed. Homes in Bilston are hit by all sorts of pollution, weather and other damaging factors which can have a detrimental effect on the condition of the mortar between the bricks, and if you notice indications of this you may have to contact a competent repointing specialist. It is essential to keep your brickwork in good shape to keep your house watertight, and the most cost effective solution is to employ a brick repointing specialist in Bilston.
It should be remembered that any house is only as sturdy as the bricks and mortar that hold it together. To keep a structure warm and dry the mortar needs to be in sufficiently good condition to stop any draughts and water from forcing its way in through holes or gaps. But how do you know when you need to repoint your home in Bilston?
Simply put, you need to inspect your exterior walls and look for any damage. Repointing is usually required if you can visually identify some problem areas. Most of the time you will be able to see quite clearly any physical signs of damage, but in places which are out of reach, such as under eaves or on chimneys; you might need to call on the services of a specialist to assist you.
You've also got to think about the questions of safety that cracked or eroding mortar can cause. The overall strength of your Bilston home depends on the condition of the mortar and bricks, and badly defective areas can negatively impact on this. Any weaknesses in the structural integrity can render a dwelling unstable with serious implications and possibly even a risk to life.
If bricks have been weakened or damaged over the years and are the reason for the problems with your mortar they might have to be removed and replaced. Any damaged bricks discovered during the inspection by the repointing specialist will be repaired or replaced before any repointing takes place.
If the exterior walls of your Bilston home have been painted or rendered in the past you could notice areas that are prone to damp or are discoloured. If you see cracks, bubbling or flaking of the paint or render it could point to more serious damage beneath the surface. An inspection of this issue, by a repointing specialist is the only effective way to guarantee the damage doesn't spread more widely and cause structural issues in the future. Any respected repointing expert in Bilston will be capable of performing this service and make certain that your home is safe, sound and looking wonderful.
WHAT ARE THE STEPS FOR REPOINTING BRICKWORK IN BILSTON?
Repointing takes a fair amount of time to accomplish properly and will entail working at height in the majority of cases. The very first thing that a repointing contractor will do is a visual survey to evaluate the severity of the damage to your property. This will enable them to offer you a quote for repointing work. Always get 2 or 3 estimates and don't always assume cheapest is best.
A further site survey might be necessary when you accept a quotation and may include the use of extending ladders, or even a scaffold, to get to inaccessible areas of your property. This second, more stringent survey may expose different problem areas that might have an effect on the initial price quote. If your home in Bilston is more than sixty years old and has never previously been repointed then it is likely to require additional work when compared with a more modern building.
Once the problems have been uncovered then work can commence. It's likely your repointing specialist will need a scaffold so as to have a safe platform whilst doing the work on your home. Some form of protective shielding or sheeting should then be attached to the outside of the scaffolding. This sheeting should prevent any mortar dust or other debris from causing damage to your house, or nearby properties, and is also a safety measure to help prevent injuries to passers-by.
Any external wires, such as satellite or TV cables, will be removed from the walls and pipes may be adjusted or removed to permit easy access to the brickwork behind. Once the project has been finished and all repointing work carried out these cables and pipes will be put back in position.
If your house is rendered, pebble-dashed or painted, these coverings will now be removed to enable the repointers to get on with the renovation project. The brickwork behind such coverings will be sanded and cleaned to ensure a uniform finish for your exterior walls.
If you haven't decided upon a style of finish (Flush, Weather Struck, Recessed or Tuck pointing), or you want to see how the various pointing options look on your house, an experienced Bilston repointing company will be happy to produce a test panel on your property. This allows you to see how each design will look on your house and showcase the different styles and colours available.
The next step is to remove the mortar in stages by raking and scraping out the joints. This can be a laborious procedure where the old mortar and any dust or loose debris has to be painstakingly removed to provide a good bonding surface for the new mortar. Particular attention is made around doors and windows since any movement in the brickwork can result in problems with their closing and opening.
One thing that should be avoided is the new mortar drying out too quickly, and this can be averted by dampening down the walls. This helps create a solid joint by keeping the mortar flexible and preventing cracks. During the mortar application there'll be smears and some excess mortar on the adjoining brickwork which looks untidy, but this will be removed as soon as it has properly dried. The walls will usually be divided into areas, and each one in turn will be repointed, allowed to dry, and then cleaned off before the team move along to the next section.
It's possible that as the repointing team are working they may find cracked bricks that need replacing, or perhaps issues with a chimney or faulty lead flashing, and a professional company will be ideally placed to perform such repair work as they go.
After cleaning the brickwork for one final time, to achieve a uniform appearance over the whole area, any pebble-dashing, rendering or re-painting of the completed wall surfaces can take place. The pipes and cables will be re-attached and the final phase of the project will be to take down the scaffold and remove all building waste and debris from the site.
An established Bilston repointing and bricklaying company will provide you with a service that should last at least 60 years. All reparation work should be offered with a warranty of at least twelve months and have construction industry accreditations.
Accreditation could take many forms, however those that are prominent in connection with bricklaying and repointing are: the National Federation of Building Contractors (NFBC), the Federation of Master Builders (FMB) and the National House Building Council (NHBC), with qualifications from industry front-runners like the Chartered Institute of Building. Every individual who works on repointing and repairing your home should additionally be signed up to the Construction Skills Certification Scheme and be able to confirm their ability and skills by showing an appropriate CSCS card.
What is Tuckpointing? A restoration strategy that can be used on old and battered brickwork where the mortar is unstable and crumbling, tuck pointing (or tuckpointing) can be extremely effective. It is an approach which is employed to aesthetically improve the look of walls to give the illusion that they're in good shape.
The old, crumbling mortar is raked out and replaced with a mixture that is colour-matched to the stone or brick in the wall. Then a thin line of lighter mortar which is contrasting in colour is inserted, giving the appearance that the formerly wide and untidy joints are neat and even.
The results of tuckpointing can be quite striking, in particular when observed from a distance, and can vastly improve the overall appearance of a wall without the requirement for disruptive renovations. You should also be able to get tuckpointing done in Tipton, Lanesfield, Ettingham, Wolverhampton, Stow Heath, Moxley, Parkfields, Coseley, Wednesbury, Darlaston, Walsall, Monmore Green, Princes End, Blakenhall, Woods Bank, and in Bilston itself.
Skip Hire Bilston
One of the main downsides of undertaking garden makeovers or home refurbishments in Bilston is the sheer amount of waste that's created. Whether or not a lot of waste is generated by your repointing work will depend on the particular circumstances of your project, sometimes there will be a lot of waste, other times not so much. When you get your price quotes you will need to ask if the removal of waste has been included, otherwise you will have to make arrangements to do this yourself.
If this job is left for you to do, you could consider hiring a skip. To match your exact needs, you can choose between a wide variety of skip sizes. Skip sizes range from skip bags to mini-skips, midi-skips to builders skips, and for major domestic or commercial projects - roll-on roll-off skips.
If you want skip hire prices for your current project in Bilston, you can do so by GOING HERE.
Bilston Repointing Tasks
There are a wide array of tasks that can be conducted by your local Bilston repointing specialist including repointing paving Bilston, restorations to damaged brickwork Bilston, brickwork paint removal, lintel replacement Bilston, the replacement of damaged brickwork Bilston, weather struck repointing, brick and masonry decorating, masonry restoration Bilston, the repointing of patios Bilston, tuck pointing Bilston, bed joint reinforcement, chimney repairs Bilston, stone wall repointing Bilston, repointing of chimneys, cheap re-pointing, mortar rake grinding, repointing of brickwork, ribbon pointing and repointing, house re-pointing, commercial repointing in Bilston, damaged brickwork repairs, repointing services, the lime pointing of brick joints, repointing crazy paving, fireplace restoration Bilston, stone restoration Bilston, crack stitching, brick gable end repointing, and scaffolding hire. Listed are just a few of the activities that are carried out by local experts in brick repointing. Bilston professionals will be happy to inform you of their full range of services.
Repointing Specialists Near Bilston
Also: Woods Bank repointing, Stow Heath repointing, Moxley repointing, Moseley Village repointing, Blakenhall repointing, Ettingham repointing, King's Hill repointing, Parkfields repointing, Princes End repointing, Monmore Green repointing, Lanesfield repointing and more.
- Bilston Roof Repointing
- Bilston Commercial Repointing
- Bilston Repointing Quotes
- Bilston Vee Pointing
- Bilston Chimney Repointing
- Bilston Domestic Repointing
- Bilston Mortar Raking
- Bilston Stone Wall Repointing
- Bilston Repointing Services
- Bilston Mortar Repointing
- Bilston Cheap Repointing
- Bilston Repointing
- Bilston Brickwork Repointing
- Bilston Paving Repointing
Repointing West Midlands: More Tipton, Wednesfield, Wednesbury, Smethwick, Coventry, Sedgley, Oldbury, Cradley Heath, Solihull, Dudley, Sutton Coldfield, Coseley, Pelsall, Aldridge, Darlaston, Brownhills, Stourbridge, Dorridge, Blackheath, Balsall Common, Brierley Hill, Birmingham, Bloxwich, Walsall, Halesowen, Bilston, West Bromwich, Wolverhampton, Kingswinford.:
Bilston Repointing Jobs: View repointing jobs near Bilston here: Bilston Repointing Jobs
To find out local information relating to Bilston, West Midlands click here
Repointing in WV14 area, telephone code 01902.