Repointing Falconwood

Repointing Falconwood Greater London (DA16): All homes and buildings in Falconwood at some point in time will require a little maintenance. If you have spotted that the mortar between the brickwork on your Falconwood house is crumbling or cracking, you'll need specialist assistance to prevent the problem from deteriorating further. If you have the need to renovate or repair your defective brickwork, a competent brick repointing company in Falconwood can provide a high quality resolution.

It has been said that a house is only as strong as its bricks and mortar, and no truer word was ever spoken. If the mortar is in a bad condition with holes, gaps or eroding areas, then draughts and moisture can get into your dwelling and cause many problems to the structure and the interior. But precisely how can can you be sure whether your home needs repointing or not?

Closeley examine your bricks and mortar, and check for any damage which is obvious. Repointing work is usually necessary if you can visually identify a problem area. You should be able to see for yourself in most situations the physical signs of degradation, but in areas for instance under eaves or on chimney stacks it may be best to get an expert to check it out for you.

Crumbling mortar doesn't just look bad, it can cause safety issues as well. The overall strength of your Falconwood home relies on the integrity of the bricks and mortar, and badly damaged sections can negatively affect this. There can be severe consequences and maybe even a risk to life, in properties that have become unsound.

If you're refurbishing an older Falconwood home, you may also have to restore any areas of brickwork that have been damaged over time. A competent Falconwood brick repointing company will repair any damaged bricks before completing the mortar repointing to ensure a perfect finish to your home.

The outside walls of a lot of Falconwood properties were rendered or painted in days past. If you start to see cracks, bubbling or flaking of the paint or plaster it could point to more serious damage under the surface coating. To stop the deterioration from spreading and triggering more severe issues in the future, it is best to seek the help of a repointing specialist who can ascertain the root cause of the problem. Any dependable repointing business in Falconwood will be capable of performing a service like this and keep your home safe and looking wonderful.

WHAT STEPS ARE REQUIRED FOR REPOINTING BRICKWORK IN FALCONWOOD?

Quite a lot of time and effort will be needed to repoint your property in Falconwood, and working up high will generally be necessary. An eyes-on inspection is the initial step in this process and will evaluate the extent of remedial work that is needed on your property. A survey is the best way by which a repointing specialist can offer you an estimate for the amount of work required on your damaged brickwork. Always get two or three quotes and don't automatically assume the cheapest is the best option.

After you have agreed to a specific quote, a second site survey may be needed using ladders or even some form of scaffolding to fully inspect your property and get to those out-of-reach areas. This second, more stringent survey may reveal additional trouble spots that may raise the original quote. If your home in Falconwood is over 60 years old and has never undergone repointing then it's likely to need extra work than a more up-to-date dwelling.

Once any problems have been detected then repointing work can start. Most buildings will need a scaffold to establish a sturdy working platform from which to do the repointing. When this has been put up then some sort of protective shielding will be secured in place. This might take the form of polythene sheeting to trap any debris and dust that is generated during the repairs.

Cables and pipes might have to be removed or adjusted to allow access to the brickwork behind them. When the project has been finished and all remedial action undertaken these pipes and cables will be fixed back in place.

Any paint, pebble-dash, rendering or other coverings will now have to be safely removed to enable the repointing team to gain access to the bare walls and begin their restorative work. Once this has been removed the brickwork can be meticulously sanded and cleaned to provide an even surface for work to begin.

To help you pick out the ideal form of pointing for your walls, a reliable Falconwood repointing company will be glad to display the different pointing styles (Flush, Tuck, Recessed or Weather Struck), by creating a test panel on your wall. This helps you to see how each will look on your property and highlight the different colours and styles on offer.

The next phase is to remove the old, crumbling mortar by raking and scraping out the joints in the brickwork. This is a time consuming process and involves the chipping or grinding away of old mortar and brushing away all the dust and loose debris to provide a good platform for the application of new mortar. Special care is made around windows and doors because any movement in the brickwork may result in problems with their closing and opening.

Something that needs to be avoided is the rapid drying out of the fresh mortar, and this can be prevented by dampening down the brickwork. This makes sure that the mortar stays flexible and allows it to dry out at a gentler pace to prevent cracking and creating a weaker joint. When it has dried sufficiently it's time to clean any smears and excess mortar from the surrounding brickwork. A wire brush is used to clean the brickwork which have been finished before starting on the next section of the wall needing work.

If any chimney repairs, brick replacement or lead flashing work is found to be needed by the repointing company during the work, now is the time that these repairs will be undertaken.

Once the entire building is repointed and cleaned, and if you want to re-paint the bricks or re-apply the rendering, then that will now be accomplished. The cables and pipes will be re-attached and the final stage of the project will be to dismantle the work platforms and scaffolding and remove all building waste and debris from the site.

A competent Falconwood repointing and bricklaying specialist will provide a restoration that should last as long as sixty years. Guarantees that are offered for the repointing should have an affiliation with providers and manufacturers from the building industry covering substandard materials.

Such accreditations could include: the Federation of Master Builders (FMB), the National House Building Council (NHBC) and the National Federation of Building Contractors (NFBC), while qualifications could range between Diplomas, City & Guilds and NVQ's from construction industry specialists such as the Chartered Institute of Building. Every individual who does work on repairing and repointing your home is also required to be part of the Construction Skills Certification Scheme and be able to prove their skills and ability by showing their CSCS card.

Ridge Tile Repointing Falconwood

Roof tiles and mortar joints should be checked every other year at a minimum. Repointing simple mortar cracks can prevent leaking roofs and expensive reroofing jobs in Falconwood. Pay extra attention to ridge tiles since they are exposed to weathering from all sides and may exhibit cracks in the mortar joints before other tiles on the roof. If cracks are discovered in the mortar between ridge tiles, the options are repoint the joints or rebed the ridge tile.

If the cracks are small and the tile seems firmly bedded, repointing the mortar is an acceptable option. If the cracks in the mortar are as wide as the mortar joint and the ridge tile seems to have some movement, it is a better idea to rebed the whole tile instead of repointing. If you repoint a tile that is no longer firmly bedded, the repair will not last very long and the crack will quickly reoccur.

Unfortunately, sometimes a ridge tile needs to be rebedded instead of repointed which requires a little more work. Again, be sure to use all safety precautions while working on the roof. Use a hammer and chisel to remove the mortar as well as the ridge tile. Use the hammer and chisel to remove the mortar from the bed on the roof and mortar from the bottom of the ridge tile. Once the ridge tile is off, replacing the ridge iron is a good idea especially if there is any evidence of rust. Remove any organic matter such as moss or mold and use a fungicide to ensure the area is clean. Then soak the in water while mixing mortar. Mix a stiff mortar in a ratio of 3:1 (sharp sand: cement). Dampen the roof and tile as you work. Mortar each side of the ridge tile and use a trowel to lay a bed of mortar on the roof. Place on the mortar bed and press down. Remove any mortar that squishes out between joints. Ensure the joint gaps are filled and smooth joints with pointing trowel.

The integrity of the roof protects your biggest investment from damages resulting from weather in Falconwood. Checking and repointing roof before cracks allow water to penetrate into the house are simple ways to save money.

Tuck Pointing Falconwood

With old and weathered brick or stonework where the mortar joints are crumbling and unstable, tuck pointing is a helpful restoration method. The cosmetic look of walls can be accentuated with this technique, giving the impression that they're in much better condition than they actually are, and giving an illusion of perfectly-formed brickwork.

The crumbling, old mortar will be removed and replaced with a mix which is colour-matched to the brick or stone in the wall. Then to give the impression that the joints are tidy and neat, where in fact the joints are actually irregular in width, a thin contrasting strip of (usually lighter) mortar is "tucked" in.

Particularly when seen from a distance, the results of tuckpointing can be quite remarkable, and without undertaking any disruptive renovations, can vastly enhance the visual appearance of a wall. (Tags: Tuckpointing Falconwood, Tuck Pointing Falconwood, Tuck Pointing Mortar Falconwood).

Falconwood Repointing Tasks

There are a whole host of tasks that can be completed by your local Falconwood repointing specialist including brickwork repointing Falconwood, patch repointing Falconwood, repointing paving, ridge tile repointing Falconwood, stone restoration Falconwood, ribbon pointing and repointing Falconwood, fireplace restoration, damaged brickwork replacement Falconwood, rubble masonry Falconwood, gable end repointing Falconwood, chimney repairs Falconwood, the lime pointing of brickwork and stonework, brick repointing Falconwood, mortar raking, crack stitching, brick & mortar tinting, repointing quotations Falconwood, stone strengthening Falconwood, renovations to damaged brickwork Falconwood, repointing services, lime mortar repairs, the repointing of chimney stacks Falconwood, lintel replacement, porch repointing Falconwood, stone pointing, commercial repointing, brickwork repointing Falconwood, masonry repairs Falconwood, brickwork conservation, the repair and repointing of stone walls Falconwood, brickwork pointing and repointing Falconwood, brick step repointing Falconwood, chimney stack repointing Falconwood, and repointing scaffolding. These are just an example of the tasks that are performed by experts in brick repointing. Falconwood companies will be happy to tell you about their full range of services.

Falconwood Skip Hire Services

When you are undertaking any type of home refurbishments or garden makeovers in Falconwood, there is likely to be a lot of waste generated. Repointing work is not like constructing a property extension, where large amounts of waste can result, nonetheless there could still be a certain amount of waste that you will need to deal with. In many cases the tradesperson you're employing will gladly take away the waste that's generated during the course of the project, but be warned - some of them don't!

Whether you're left with doing this yourself, or the tradesperson is sorting it out, a skip will often be required. Various skip sizes are available to accommodate the volume of rubbish that you've got. For smaller projects you can choose skip bags and mini-skips, for bigger home refurbishments and garden clearances there are midi-skips and builders skips, and for industrial use or really massive projects, roll-on roll-off skips are the preferred alternative.

If you would like skip hire prices for your latest project in Falconwood, you can do this by CLICKING HERE.

Repointing Specialists Near Falconwood

Also find: Middle Park repointing, Welling repointing, Elmstead repointing, Ruxley repointing, Belvedere repointing, Blendon repointing, Avery Hill repointing, Horn Park repointing, Blackfen repointing, Plumstead repointing and more.

Repointing Specialist Services Falconwood

Find a Repointing Specialist in Falconwood Here

• Falconwood Brickwork Repointing
• Falconwood Brick Wall Repointing
• Falconwood Chimney Repointing
• Falconwood Commercial Repointing
• Falconwood House Repointing
• Falconwood Ribbon Pointing
• Falconwood Repointing
• Falconwood Cheap Repointing
• Falconwood Paving Repointing
• Falconwood Brick Joint Raking
• Falconwood Gable End Repointing
• Falconwood Lime Mortar Repointing
• Falconwood Repointing Services
• Falconwood Roof Repointing

Repointing Greater London: More Greater London repointing specialists: Finchley, Bexleyheath, Walthamstow, Brixton, White City, Hendon, Neasden, Cheam, Deptford, Southall, Stanmore, Arnos Grove, Sutton, Purley, Penge, Muswell Hill, Clapham, Teddington, Surbiton, Ruislip, Oakwood, Raynes Park, Croydon, Peckham, Ponders End, Bexley, Eastcote, Petts Wood, Harlesden, Catford, Greenford, Lewisham, Westminster, Hounslow, Brentford, Feltham, Cricklewood, Abbey Wood, Putney, Ickenham, Northwood, Hayes, Enfield, Wembley, Woodford, Uxbridge, Tooting, Beckenham, Twickenham, Coulsdon, New Malden, Lambeth, Pinner, Dulwich, Hillingdon, Wanstead, Chelsea, Sidcup, Stratford, Norbury, Chalk Farm, Chiswick, Tottenham, Erith, Edmonton, Ealing, Richmond upon Thames, East Ham, Battersea, Orpington, Wood Green, Mitcham, West Wickham, Selhurst, Greenwich, Bethnal Green, Fulwell, Woolwich, Hampstead, Eltham, Northolt, Willesden, Wimbledon, Hammersmith, Heston, Thornton Heath, Colliers Wood, Beddington, Brimsdown, Thamesmead, Camberwell, Bermondsey, Isleworth, London, Plaistow, Acton, Charlton, Kingston upon Thames, Worcester Park, Harrow, New Addington, Barnet, Harefield, Kenley, Hornsey, Wallington, Mottingham, Dalston, Bromley, Falconwood, Edgware and Poplar.

For local information on Falconwood, Greater London look here

Repointing in DA16 area, 020.

Repointing Falconwood - Repointing Brick Walls Falconwood - Repointing Brick Falconwood - Residential Repointing Falconwood - Patio Repointing Falconwood - Repointing Quotations Falconwood - Repointing Chimneys Falconwood - Brick Repointing Falconwood - Brickwork Repairs Falconwood