Repointing Ringwood

Ringwood Brick Pointing & Repointing Services

Repointing Ringwood Hampshire (BH24): All houses in Ringwood will at some point in time require a bit maintenance. If the brickwork on your Ringwood house looks a bit shabby with missing or crumbling mortar, you'll want to act quickly to prevent the condition from getting worse. A reliable brick repointing specialist in Ringwood will provide an effective solution to repair your brickwork and make certain that it remains watertight.

Free Ringwood Repointing Quotes

You must remember that any house is only as sturdy as the bricks and mortar that hold it together. If the mortar is in a poor condition with gaps, holes or eroding spots, then draughts and damp can enter your house and cause many problems to the structure and the interior. How can you tell when your house in Ringwood needs repointing?

Repointing Ringwood Hampshire (BH24)

Quite simply, you need to take a good look at the mortar and bricks of your outside walls. If you are able to see issues then you've got an issue. In the majority of buildings you'll be able to spot any indications of degradation reasonably easily, although it might be necessary to bring in a specialist to examine those hard to reach and remote places like under eaves or on chimney stacks.

It isn't just the appearance that's in jeopardy if your home in Ringwood needs repointing, there are questions of safety to consider as well. The mortar is the foundation of strength in your Ringwood home and is the binding agent that holds the shape and structure together. Any weaknesses in the construction can make a building unstable with severe consequences and maybe even a risk to life.

It may be that crumbling or missing mortar is the result of damaged bricks. Any deteriorating bricks discovered during the inspection by the repointing contractor will be repaired or replaced before any mortar repointing is attempted.

Repointing Brickwork Ringwood UK (01425)

It could be the case that in the past your Ringwood home's exterior brick walls were plasterered over or painted. If there are signs of bubbling, peeling or other damage to painted or rendered brickwork, it may be a warning of issues with the mortar or bricks allowing damp into the walls. The only safe way to figure out an issue of this type is by using a professional brickwork and repointing contractor who'll find the root cause behind the mortar damage. Through the use of a qualified and reputable bricklayer or repointing specialist you'll keep the exterior walls of your property in the best condition possible.


Repointing can be a time consuming process and may entail working at height, depending on your property type. To enable a repointing contractor to accurately evaluate the repair work that's required on your home they will first need to undertake a visual inspection. This will enable them to provide you with an estimate for repointing work needed. Remember to always obtain more than one estimate and don't always assume cheapest is best.

If you've got out-of-reach sections of your property that were unable to be checked out during the first site survey, a further inspection with long ladders and possibly scaffolding could be required. A quotation after the second survey could even be higher thanks to issues uncovered by this more detailed inspection. The older your building is, the more chance that it's going to need repointing work, and this is especially true for those homes in Ringwood over 60 years old.

Repointing Quotes Ringwood Hampshire

Work can begin once the problem areas have been uncovered and discussed with the property owner. Most properties will need a scaffold to establish a secure platform for the repointing team. An arrangement of protective sheeting or shielding will then be attached to the outside of the scaffold. This is to avoid any damage to property and minimise any risk of injury to people in the vicinity of the work.

All exterior wiring, such as TV or satellite cables, will be removed from the walls and any piping may be removed or adjusted to permit access to the brickwork behind. When the project has been completed and all repointing work carried out these pipes and cables will be fixed back in place.

To allow the repointers to access the brickwork in question, any pebble-dash, rendering or paint will now have to be removed before work can commence. The brickwork behind these outer coverings will be sanded and cleaned to make sure that the finish on your brickwork is consistent.

Brick Repointing Near Ringwood (BH24)

A dependable Ringwood repointing company will be happy to mock up a small test panel on your brickwork to help you to decide on the various mortar styles that are available, (Weather Struck, Flush, Tuck or Recessed pointing). This enables you to see how each design will look on your brickwork and demonstrate the different colours and styles on offer.

Now the messy work will begin as the old mortar is taken out by raking and scraping out the joints. This is a time consuming process and entails the chipping or grinding away of old mortar and brushing out any dust and loose debris to provide a nice, clean surface for the application of new mortar. The repointers will be particularly cautious around doors, windows and other openings where movement in the brickwork or over application of mortar can result in difficulty in opening and closing them.

Once the joints have been cleaned, the brickwork will be damped down to help stop the new mortar from drying out too quickly and subsequently cracking. This helps create a strong joint by keeping the mortar flexible and preventing cracks. During the application of the mortar there'll be excess mortar and smears on the brickwork that can look untidy, however this will be removed as soon as it has dried. The repointers will work on the brickwork in sections, cleaning each one in turn before moving on to a new area.

If any lead flashing replacement, brick replacement or chimney repairs needs doing by the repointing company as part of the project, now is the time when these repairs will be carried out.

Chimney Repointing Ringwood (BH24)

After cleaning the brickwork for a final time, to obtain a uniform appearance, any painting or rendering of the finished wall surface can take place. The cables and pipes will be re-positioned and the final phase of the project will be to disassemble the work platforms and scaffolding and dispose of all building waste and debris.

An experienced Ringwood repointing and brick repair specialist will provide you with a service that should be good for another 60 years. All reparation work should be offered with a guarantee of at least twelve months and have building industry certifications.

If a company has qualifications or accreditations from bodies like the National House Building Council (NHBC), the Federation of Master Builders (FMB) and the National Federation of Building Contractors (NFBC), you can be assured you are using the services of a reliable and experienced business. Every person who works on repairing and repointing your brickwork should additionally be a member of the Construction Skills Certification Scheme and be willing to demonstrate their ability and skills by producing their CSCS card.

Beyond Aesthetics: The Crucial Role of Repointing in Building Preservation

Throughout the years, various things can lead to the breakdown of mortar:

  1. Natural ageing: Time can take its toll on mortar, naturally weakening its strength and making it more susceptible to damage.
  2. Weathering: The harsh elements of freezing temperatures, rain and wind take their toll on mortar over time, causing it to weaken and crack, eventually crumbling.
  3. Incompatible mortar composition: A mismatched mortar selection - using an unsuitable sort of mortar for the particular application can speed up deterioration and potentially cause incompatibility issues with the pre-existing materials.
  4. Movement in the structure: Stress can be put on mortar joints by shifting foundations or other structural movement, leading to cracking and separation.

Book a Repointing Specialist in Ringwood UK

Repointing services are accessible in Ashley Heath, Poulner, North Poulner, Hightown, Ellingham, North Kingston, Rockford, Sandford, Crow, Bagnum, Forest Corner, Somerley, Highwood, Hangersley, in the following postcodes: BH24 1BH, BH24 1GZ, BH24 1JR, BH24 1JF, BH24 1LX, BH24 1AY, BH24 1QJ, BH24 1LF, BH24 1LW, and BH24 1HR, plus in Ringwood itself. Locally based Ringwood repointing contractors will likely have the postcode BH24 and the phone code 01425. Checking this can make sure that you access locally based repointing. Ringwood householders are able to benefit from these and various other comparable services.

Tuck Pointing Ringwood

What Exactly is Tuck Pointing? Tuckpointing is a procedure for repointing old and weathered brickwork where the mortar is crumbling and unstable. To give the illusion that they are in perfect condition, it is a technique which is employed to aesthetically accentuate the appearance of walls.

Firstly, the crumbling, old mortar is removed, and this is then replaced with a new colour-matched mortar mixture which replicates the colour of the stone or brick in the wall. Next off, a narrow, contrasting strip of lighter mortar is applied, to make it appear like the joints are neat and even, where they previously looked like they were wide and irregular.

Avoiding the need for any major renovations, tuck-pointing can dramatically improve the visual appearance of a wall, and can be pretty effective, particularly when seen from a distance.

Patch Repointing Ringwood

Unlike a full-blown repoint, which involves replacing mortar across the entire building surface, patch repointing concentrates on distinct damaged areas, making it a more focused and cost-effective approach. Keeping brickwork in good shape, particularly in older structures in Ringwood, involves essential patch repointing. With the passage of time, wear and weathering cause the mortar that is sandwiched between the bricks to degrade. When such damage happens, it becomes vital to restore these areas to avert further damage and maintain the stability of the structure Patch repointing tackles crumbling mortar by carefully removing it and infilling the gaps with fresh mortar that replicates the original as accurately as possible. The procedure not only improves the brickwork's appearance but also enhances the wall's overall integrity.

Patch Repointing Ringwood

Preserving their properties, a growing number of property managers and homeowners in Ringwood are turning to patch repointing and pointing services. These services become essential in places experiencing harsh weather, where water infiltrates cracks, freezes, and leads to serious damage. A seamless and effective repair is ensured by repointing specialists in Ringwood, who carefully choose the appropriate mortar to complement the building's age and style.

Because more significant structural issues can be prevented, investing in patch repointing can be a long-term cost-saving measure. Timely repairs can be facilitated by routine inspections that pinpoint areas needing attention. Specialist repointing services allow homeowners in Ringwood to keep their buildings attractive, safe and functional for years to come. (Patch Repointing Ringwood)

Mortar Colour Matching

It is often the fine details that are essential to the aesthetics and integrity of masonry structures, especially older or historical ones. Mortar colour matching is one of the most crucial details among these. To the untrained eye, mortar colour matching may seem like a minor aspect, but it is a necessary part of any brick restoration project to purists and professionals.

Mortar Colour Matching Ringwood

The binding agent for stones, bricks, or other masonry products in the context of masonry is mortar. The structure is visually appealing and structurally sound because of it. The combined effect of bricks and mortar is what we see when we look at a brick wall, not just the bricks. The overall look of a structure can be dramatically affected by any incongruity in mortar colour.

The new mortar should be seamlessly integrated with the existing one during the repair or refurbishment of a building. Here, the art and science of mortar colour matching come to the fore. Maintaining uniformity ensures that the building retains its original aesthetic appearance, making it look as if no work has been done at all - a perfect outcome in restoration projects.

Getting the colour match just right is frequently more challenging than one might first imagine. Factors to consider include:

  1. Binders: Materials like cement and lime, which act as binders, also influence the mortar's colour. The proportions in which they're used can subtly change the shade of the mortar.
  2. Sand: The granularity, colour and type of the sand used in a mortar mixture are key determinants of its final colour. With different regions yielding sands of diverse colours, the need for choosing the correct sort of sand is heightened.
  3. Additives: In modern mortar formulations, additives such as durability-improving chemicals and colouring agents are common, and each can alter the mortar's final colour.

Environmental influences, including air pollution, fluctuations in temperature and moisture, can cause the colour of mortar to alter with time. Consequently, the task involves not only matching the original colour but also considering how the new mortar will age compared to the old.

Matching the colour of mortar offers more than just visual improvements. Thermal movement or differential settling can arise if there is a mismatch in the mortar's strength and composition. This may result in the building's structural integrity being compromised over time.

To sum up, it is evident that accurate mortar colour matching is an essential part of masonry renovation, demanding both the ability to achieve a visually harmonious result and a deep understanding of technical processes. From restoring a cherished family home to preserving a historic landmark, achieving the ideal mortar match is paramount. Its value extends beyond mere aesthetics, guaranteeing both durability and longevity for many years to come. (79031 - Mortar Colour Matching Ringwood)

Skip Hire Ringwood

Skip Hire Ringwood

Home refurbishments, garden makeovers and even modest do-it-yourself projects are renowned for the volume of waste that is produced and needs to be got rid of. Varying amounts of waste will result from repointing work, subject to your individual circumstances. While some tradesmen will be quite happy to take away any waste materials, some will leave it for you to deal with.

Regardless of whether the tradesman is dealing with this or you are doing it yourself, hiring a skip will frequently be the best waste removal solution. Skips come in all shapes and sizes, so there's certain to be one out there to suit your precise needs. Mini-skips hold around 2 yards of waste, midi-skips hold around 4 yards of waste, builders skips hold around 6 yards of waste and roll-on-roll-off skips hold around 20 yards of waste. Skip bags usually hold 1-1.5 yards of waste.

GO HERE to get skip hire quotes for the Ringwood area.

Ringwood Repointing Tasks

Just Some of the Work That a Repointing Specialist Can Do

Repointing Tasks Ringwood

There is a variety of work that can be accomplished by your local Ringwood repointing specialist including patch repointing, brickwork paint removal in Ringwood, brick joint raking and repointing in Ringwood, industrial repointing in Ringwood, tuck pointing, valley repointing in Ringwood, crack injection, ribbon pointing in Ringwood, brick & mortar tinting in Ringwood, repairs to cracks in brickwork in Ringwood, the restoration of damaged brickwork, lime mortar pointing, lead valleys renewed or repaired, brickwork inspection, brickwork sealing, brickwork joint raking, fireplace restoration, rubble masonry, chimney repointing in Ringwood, stone wall repointing, lintel replacement, repointing of garden walls, ridge tile repointing, dry verge installation, chimney repairs, strap repointing, bucket handle pointing and repointing, damaged brickwork replacement, brickwork repointing in Ringwood, brick step repointing, and repointing scaffolds. Listed are just a handful of the activities that are carried out by those specialising in brick repointing. Ringwood providers will inform you of their whole range of repointing services.


Repointing Specialists Near Ringwood

Also find: Rockford repointing, Hightown repointing, North Kingston repointing, Somerley repointing, Ellingham repointing, Forest Corner repointing, Sandford repointing, Crow repointing, Hangersley repointing, Ashley Heath repointing, North Poulner repointing, Highwood repointing, Poulner repointing, Bagnum repointing and more. Repointing services are widely available in all of these villages and towns. Possessing exceptional skills, these experts can transform your brickwork, restoring its original splendour. Don't let weary brickwork drag down your kerb appeal. Let skilled hands breathe new life into your facade and unlock the hidden beauty within. By clicking here, repointing quotes are available to local residents.

Repointing Specialist Services Ringwood

Find a Repointing Specialist in Ringwood Here
Repointing Services in Ringwood Hampshire (01425)
  • Ringwood Repointing Services
  • Ringwood Mortar Raking
  • Ringwood Ribbon Pointing
  • Ringwood Chimney Repointing
  • Ringwood Brick Repointing
  • Ringwood Residential Repointing
  • Ringwood Paving Repointing
  • Ringwood Lime Mortar Repointing
  • Ringwood Repointing Quotations
  • Ringwood Mortar Repointing
  • Ringwood Cheap Repointing
  • Ringwood Brickwork Repointing
  • Ringwood Repointing
  • Ringwood Brick Wall Repointing

Ringwood Repointing Jobs: Find repointing jobs in Ringwood here: Ringwood Repointing Jobs

To read local Ringwood info take a look here

Repointing in BH24 area, phone code 01425.

TOP - Brick Repointing Ringwood


(This repointing Ringwood content was created on 17-05-2024)