Repointing Street

Street Brick Pointing & Repointing Services

Repointing Street Somerset (BA16): At some point every building in Street will need some repair and maintenance, whether it's a commercial property or a domestic home. You must not ignore the signals if the brickwork on your home in Street is starting to look shabby, and you have noticed that the mortar joints are cracking or becoming eroded. To find an effective solution to repair your brickwork and guarantee that it stays watertight, you will need to get hold of a competent brick repointing company in Street.

Street Repointing Quotes

It is stated that a house is only as sound as its mortar and bricks, and no truer word was ever spoken. If the mortar is in a bad condition with holes, gaps or crumbling sections, then moisture or draughts can get into your dwelling and cause many issues with the integrity of the structure. How do you know when your brickwork in Street needs to be repointed?

Professional Repointing Street

Take a close look at your brickwork, and check for any clear and visible damage. If a short examination such as this uncovers some obvious problems, then you've definitely got an issue. In most instances you will be able to see any physical signs of degradation, but in sections that are remote or hidden, such as under eaves or on chimney stacks; you might need the services of a specialist to help you.

When your home in Street needs to be repointed, it isn't merely the aesthetics that are of concern, there are also safety risks that need to be taken into account. If the mortar is in a poor state of repair this can impact on the stability of a structure, since the mortar is the "glue" that binds the whole thing together and keeps it sound. A property can become unpredictable if it's structure is compromised in this way, and it can cause severe damage or even danger to life, particularly when present in taller buildings or chimneys.

If brickwork has been damaged or weakened over time and is a major cause of problems with your mortar it may have to be removed and replaced. Any defective bricks discovered during the inspection by the repointing company will be replaced or repaired before any repointing is attempted.

Brickwork Repointing Street

To help in shielding the brickwork, many properties in Street had their exterior walls painted or rendered. Any discolouration, bubbling or flaking of plaster or paint could indicate damage to either bricks or mortar beneath the surface. Bringing in a professional brickwork and repointing contractor, is really the only reliable way to figure out an issue of this type, and find the main cause. This will help to keep your home in the best condition possible, and in the secure knowledge that the work has been accomplished professionally.


It takes time to repoint a whole house and, depending on the design of your home, can also involve working at considerable height. To allow a repointing contractor to accurately determine the restorative work that's required on your house they'll first have to undertake an eyes-on survey. A survey is the best way by which a repointing contractor can offer you an itemised quotation for the level of work that is needed on your damaged brickwork. Don't assume all repointing contractors in Street offer the same level of service and the cheapest price quote may not always be the best choice.

The use of ladders, or even scaffolding might be necessary to access out-of-reach sections of your premises, and an additional site survey may be essential to check this, after you have agreed to a specific quotation. This second, more stringent survey may expose additional problem areas that may raise the initial quote. If your Street property has not been repointed previously and was built over sixty years ago, the chances are that it will need more restoration work than a more modern property would.

Quotes for Repointing Street

As soon as all the problems with your home have been established, a decent repointing contractor or company in Street will go over the best options for repair. To provide a sturdy working platform for the team of repointing specialists, most properties will require a scaffold to be erected. When the scaffolding is up a protective sheet will be fixed on its outer side. This helps to prevent any property damage and minimise the injury risk to anybody in the vicinity of the work.

Pipework and cabling may have to be removed or adjusted to allow access to the brickwork behind them. This is only temporary and they will be returned to their appropriate position once all work has been finished.

To allow the repointing contractors to access the brickwork in question, any rendering, paint or pebble-dash will now have to be removed before work may start. When this has been removed the bricks can be diligently cleaned and sanded to establish an even surface to work on.

Brick Repointing Near Street (BA16)

To help you choose the ideal form of pointing for your walls, a good Street repointing contractor will be willing to display the various pointing styles (Weather Struck, Flush, Recessed or Tuck), by the creation of a test section on your wall. This helps you see how each design will look on your property and demonstrate the different styles and colours available.

The next step is to take out the old, crumbling mortar by raking and cleaning out the joints in the brickwork. This is a time consuming stage and involves the grinding or chipping away of old mortar and brushing away all the dust and loose debris to provide a clean surface for the application of new mortar. Any doors and windows will be paid extra care by the repointing team to avoid any disturbance of the frames or having too much mortar applied which could cause problems in their closing and opening.

So that the new mortar doesn't dry out too fast, the brickwork will be damped down before the new pointing begins. The slower drying time stops the mortar from becoming inflexible and cracking, which can bring about a weaker joint. When it has dried sufficiently it's time to clean up any smears and excess mortar from the adjacent bricks. The repointers will tackle the walls in sections, cleaning each one in turn before starting on a new patch.

It's possible that as the repointing team are doing their work they might find crumbling bricks that need replacing, or perhaps problems with faulty lead flashing or a chimney, and a professional company will be in a position to perform these repair work as they go along.

Chimney Repointing Street (BA16)

Any paint, render or other wall covering that you require will be applied as soon as all of the remedial work has been concluded. After the pipes and TV and satellite cables have been put back into place, scaffolding will be dismantled and all the waste and debris is taken away from the site.

Your brick repointing should be good for 50-60 years provided that it's undertaken by a certified and experienced repointing contractor in Street. Guarantees that are provided for the repointing should be affiliated with with manufacturers and providers from the building industry giving cover for defective materials.

If a company has accreditation or qualifications from associations like the Federation of Master Builders, the National House Building Council and the National Federation of Building Contractors, you can be reassured you are using the services of a professional and reputable business. Every individual who does work on repointing your home should also be signed up to the Construction Skills Certification Scheme and be willing to confirm their skills and ability by producing an appropriate CSCS card.

More Than Just a Fix: The Necessity of Repointing for Building Health

Mortar, like just about all materials, succumbs to the passage of time, weakening and becoming more prone to damage:

  1. Natural ageing: Mortar's inherent strength wanes with age, leaving it more prone to damage as the years roll by.
  2. Non-compatible mortar composition: Mortar compatibility is important! Using an inappropriate type for the application can lead to faster breakdown and potential conflicts with the pre-existing materials.
  3. Structure movement: Factors like shifting foundations and general structural movement can put stress on the mortar joints, causing them to crack and potentially separate.
  4. Weathering: Persistent exposure to wind, freezing temperatures and rain wreaks havoc on mortar, weakening its structure and causing it to crumble and crack over time.
Book a Repointing Specialist in Street UK

Repointing work can be done in Street and also nearby in: Baltonsborough, Walton, Beckery, Butleigh Wootton, Shapwick, Meare, Northover, West Pennard, High Ham, Overleigh, Ashcott, Lower Leigh, Compton Dundon, Butleigh, together with these postcodes BA16 0DG, BA16 0DU, BA16 0LD, BA16 0FS, BA16 0HX, BA16 0BP, BA16 0AY, BA16 0ND, BA16 0FZ, and BA16 0EE. Repointing contractors from Street should have the postcode BA16 and the telephone code 01458.

Chimney Repointing

A chimney is often overlooked when it comes to property maintenance, yet a chimney that's falling into disrepair can be an expensive hazard. During a preliminary evaluation of your chimney in Street, an expert could recommend repointing or possibly a complete rebuild of your chimney, according to the size of the damaged and affected area. Specialist chimney repointing will restore the stability of your chimney by replacing the crumbling, old mortar with new material. This can prevent the requirement for a total chimney rebuild and give you peace of mind for many more years. Having your chimney repointed also helps in preventing damage to the interior of your chimney, by stopping moisture from seeping through the cracks in old mortar. Most modern chimneys will be steel lined and if moisture makes contact with this liner, it can seriously reduce its lifespan. As soon as the repointing work has been finished, an external sealant should be applied which repels water and allows the release of any internal moisture. LEARN MORE HERE.

Brickwork Crack Stitching Street

When brick structures and buildings have severe cracks in them, a procedure called brickwork crack stitching can be used to repair them. A specialised grouting method is used to secure stainless steel rods that have been inserted into the mortar bed of the affected brickwork, providing additional support to the brickwork structure. The primary goal of this strategy is to strengthen the affected brickwork, ensuring that it is well-supported and protected from further cracking. The steel rods used in this technique are designed to flex, allowing them to react to the structure's natural movements and absorb any stresses, thus preventing further damage to the damaged brickwork. By employing the crack stitching process, cracks in brick structures, including walls, bridges, chimneys and arches, can be effectively repaired, resulting in increased structural integrity. This process is a practical and cost-effective solution to a common problem in brick-built structures, providing long-term stability and durability. This process can be used on both historic and modern structures and is frequently favoured over other repair procedures, such as rebuilding or repointing, as it is less invasive and more cost-effective. The reliability and effectiveness of crack stitching have made it a widely accepted solution for fixing cracks in brick-built structures and buildings, and it is often the first choice for homeowners and contractors seeking a practical solution.

Patch Repointing Street

By targeting specific sections of damage, patch repointing provides a more focused and economical solution than a full-blown repoint, which entails the renewal of mortar across the whole surface of a building. Particularly in older buildings in Street, patch repointing is an essential maintenance task for brick and stonework. Weathering and wear gradually erode the mortar that's situated between the bricks with the passage of time. When such damage happens, it becomes important to restore these areas to avoid further damage and maintain the stability of the structure To patch-repoint a surface, impaired mortar is meticulously removed and replaced with fresh mortar that accurately replicates the original in terms of texture and colour. Besides improving the aesthetic appearance of the brickwork, this method plays a crucial role in ensuring the structural soundness of the wall.

Patch Repointing Street

Extending a building's life? Patch repointing and pointing is a popular choice amongst property managers and householders alike. These services are particularly important in areas with severe weather conditions, as water can penetrate cracks and freeze, causing substantial damage. Specialist repointing services in Street will carefully select the right kind of mortar to match the building's age and style, ensuring a seamless and effective repair.

Opting for patch repointing can prevent more serious structural issues and save money over the long term. Frequent inspections can identify areas that need attention, allowing for timely repairs. Property owners in Street can keep their buildings functional, safe and attractive for many years to come by using specialist patch repointing services. (Patch Repointing Street)

Brickwork Joint Raking Street

The process of brickwork joint raking is used to remove old, crumbling mortar from between the bricks in a wall. This is normally done before repointing, a process in which new colour-matched mortar is applied to the joints. Raking out the old mortar helps ensure the new mortar bonds nicely with the brickwork, providing a strong and long-lasting finish.

Brickwork Joint Raking Street

This process involves the careful removal of the old mortar using specialised tools like a raking bar or a mortar raking blade, without causing damage to the bricks. To allow the new mortar to properly set and adhere, it’s important to remove the mortar to an appropriate depth, normally around fifteen to twenty millimetres.

Enhancements to the appearance and longevity of the brickwork are accomplished through the joint raking process. To keep the brickwork looking good and maintain the integrity of the building, it prevents water ingress and structural damage. This makes the raking of brick joints a vital part of maintaining and restoring brick walls in Street. (Brickwork Joint Raking Street)

Colour Matching Mortar

The integrity and aesthetics of masonry structures in Street, especially historical or older ones, rely heavily on the fine details. Among these details, one that stands out in its importance is mortar colour matching. It may seem like a minor aspect to the untrained eye, but to professionals and purists, it's an important part of any brick restoration project.

Mortar Colour Matching Street

Mortar is the binding agent that holds together masonry products such as stones, bricks, or others. The structure's visual appearance is heightened by its provision of structural integrity. The visual impact of a brick wall is not just due to the bricks, but also the mortar sandwiched between them. Therefore, any difference in mortar colour can dramatically affect the overall appearance of a structure.

The seamless blending of new mortar with pre-existing mortar is a crucial aspect of building repair or restoration. In cases like this, mortar colour matching becomes vitally important, and involves a unique mixture art and science. Ensuring uniformity preserves the structure's original visual appearance, creating the illusion that no work has been done at all - the ideal outcome in refurbishment projects.

The task of matching colours accurately can be more challenging than it initially appears. Considerations to keep in mind include:

  1. Binders: Binding agents, specifically lime and cement, have a significant influence on the mortar's colour. Subtle shade variations can be achieved by modifying the proportions in which these materials are used.
  2. Sand: The specific colour, granularity and type of sand in the mortar mixture are central to its resulting colour. The variation in sand hues and shades across different regions necessitates the careful selection of the right type of sand.
  3. Additives: Modern mortars might include a number of additives, from chemicals that enhance durability to advanced colouring agents. Each additive can have an effect on the final colour of the mortar.

The colour of mortar is subject to change over time due to environmental aspects such as moisture, air pollution and temperature variations. As such, the operation is not just about matching the initial colour but also about anticipating the ageing of the new mortar in relation to the old.

Beyond mere appearance, mortar colour matching provides additional benefits. A mismatch in the composition and strength of the mortar can lead to complications like thermal movement or differential settling. The structural integrity of the building can be compromised as time passes as a result.

To sum up, achieving an accurate matching of mortar colour is crucial for the successful refurbishment of masonry and brickwork, requiring both technical skill and a keen eye for detail. Whether you're a homeowner in Street who is revamping a family home or a conservator entrusted with a historical building, ensuring a perfect mortar match is essential. Its value extends beyond mere aesthetics, guaranteeing both longevity and durability for many years to come. (63254 - Mortar Colour Matching Street)

Street Repointing Tasks

Just Some of the Tasks That a Repointing Specialist Can Do

Repointing Tasks Street

There is a wide range of work that can be undertaken by your local Street repointing specialist including stone restoration in Street, damaged brickwork replacement, residential repointing, cheap repointing, chimney repointing, porch repointing, lime mortar repointing, fireplace restoration in Street, strap repointing, brick repointing, brickwork crack stitching, house pointing and re-pointing, the repointing of patios in Street, patch repointing, paint removal from brick, repairs to cracked brickwork, dry verge installations in Street, brickwork colour restoration services, ribbon repointing, crack injection, brick & mortar tinting, the repointing of stone walls, brickwork cleaning, the repointing of brickwork joints, brickwork sealing, bed joint reinforcement, brick gable end repointing, the lime pointing of brickwork and stonework, ridge tile repointing, re-pointing crazy paving, and scaffolding hire. These are just some of the duties that are accomplished by those specialising in brick repointing. Street providers will tell you about their entire range of repointing services.


Repointing Specialists Near Street

Also find: Meare repointing, Baltonsborough repointing, Lower Leigh repointing, Overleigh repointing, Beckery repointing, Butleigh repointing, Walton repointing, Compton Dundon repointing, Northover repointing, Butleigh Wootton repointing, Ashcott repointing, Shapwick repointing, High Ham repointing, West Pennard repointing and more. Builders who do repointing can be found in practically all of these places. These seasoned specialists, equipped with a wealth of expertise and know-how, deliver a flawlessly executed repointing project. Considering professional intervention is advisable if you're dealing with brickwork that looks old and shabby, to help set it right. Repointing quotes are available to local home and property owners by clicking here. Do you need repointing services? Get a quote today!

Repointing Specialist Services Street

Find a Repointing Specialist in Street Here
Repointing Services in Street Somerset (01458)
  • Mortar Repointing
  • Porch Repointing
  • Brick Repointing
  • Weather Struck Pointing
  • Repointing Estimates
  • Repointing Services
  • Household Repointing
  • Commercial Repointing
  • Brickwork Repointing
  • Mortar Raking
  • Repointing
  • Chimney Repointing
  • Cheap Repointing
  • Wall Repointing
Other Tradespeople Near Me Street

Other Tradespeople in Street: Obviously, when you happen to be doing home repairs and improvements in Street, you'll likely be in need of all sorts of different tradesmen and as well as repointing in Street, you might additionally need floor screeding in Street, a bathroom specialist in Street, scaffolding in Street, a roofer in Street, roof cleanaing in Street, a flooring specialist in Street, brick cleaning in Street, an electrician in Street, plastering services in Street, stone worktops in Street, SKIP HIRE in Street, a cellar conversion specialist in Street, groundwork in Street, and other different Street tradesmen.

To find local information about Street, Somerset take a look here

Repointing in BA16 area, phone code 01458.

TOP - Brick Repointing Street

House Repointing Street - Repointing Chimneys Street - Stone Wall Repointing Street - Brick Repointing Street - Repointing Specialists Street - Repointing Street - Brickwork Repointing Street - Household Repointing Street - Patio Repointing Street


(This repointing Street page was created on 17-06-2024)